<?xml version="1.0" standalone="no"?>
<!--
 * Licensed to the Apache Software Foundation (ASF) under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.
 * The ASF licenses this file to You under the Apache License, Version 2.0
 * (the "License"); you may not use this file except in compliance with
 * the License.  You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
-->

<!DOCTYPE s1 SYSTEM "sbk:/style/dtd/document.dtd">

<s1 title="Build Instructions">
  <s2 title="Build Instructions">

    <p>Much of this documentation is historical in nature. The only
    officially supported platforms with committed testing and maintenance
    at this time are Windows (native, NOT Cygwin or other variants), 
    Linux, and MacOS. All other builds are unsupported and untested
    and should be expected to require patching and build debugging.
    Patches are accepted for other platforms, as are maintainers
    interested in taking over responsibility for supporting them.</p>

    <p>While the CMake support is portable, officially the autoconf
    support is intended to be used for Linux and MacOS and CMake used
    for Windows.</p>

    <p>Build instructions are provided for the following platforms and
       compilers:</p>

    <ul>
       <li><link anchor="CMake">All</link></li>
       <li><link anchor="UNIX">UNIX/Linux/Mac OS X/Cygwin/MinGW</link></li>
    </ul>

    <anchor name="CMake"/>
    <s3 title="Building on all platforms with CMake">

        <p>For building on any platform with any supported build
           system &XercesCName; uses the CMake build generator and
           requires that you have <jump
           href="https://cmake.org/">CMake</jump> installed.
           Additionally, a build tool such as <jump
           href="http://www.gnu.org/software/make/make.html">GNU
           make</jump> or <jump
           href="https://ninja-build.org/">Ninja</jump> is required for
           building.  CMake supports a wide range of generators for
           several different compilers, build tools and popular IDEs,
           including Eclipse, Kate, Visual Studio, Sublime Text and more.
           Any of these may be used to build &XercesCName;.  Run
           <code>cmake --help</code> to display the full list of
           supported generators for your platform.</p>

        <p>As with all CMake projects, the build process is divided
           into several parts: configuration and building, followed by
           (optional) testing and installation. The configuration part is
           performed by running the <code>cmake</code> command.  The
           build part is performed by invoking the chosen build tool
           such as <code>make</code> or <code>ninja</code>, or by opening
           the generated project files in your IDE, and building from
           within the IDE.</p>

        <p>Besides the standard <code>cmake</code> <jump
           href="https://cmake.org/cmake/help/latest/manual/cmake-variables.7.html">variables</jump>,
           &XercesCName; provides a number of project-specific options
           that are worth mentioning. You can specify one option for each
           category outlined below. If you do not specify anything for a
           particular category then <code>cmake</code> will select the
           most appropriate default, based upon the available options for
           your system. At the end of its execution <code>cmake</code>
           prints the selected values for each category.</p>


	<p>Net Accessor (used to access network resources):</p>

        <table>
          <tr>
            <th>Option</th>
            <th>Description</th>
          </tr>
          <tr>
            <td><code>-Dnetwork-accessor=curl</code></td>
            <td>use the libcurl library (only on UNIX)</td>
          </tr>
          <tr>
            <td><code>-Dnetwork-accessor=socket</code></td>
            <td>use plain sockets (only on UNIX)</td>
          </tr>
	  <tr>
            <td><code>-Dnetwork-accessor=cfurl</code></td>
            <td>use the CFURL API (only on Mac OS X)</td>
          </tr>
	  <tr>
            <td><code>-Dnetwork-accessor=winsock</code></td>
            <td>use WinSock (only on Windows, Cygwin, MinGW)</td>
          </tr>
          <tr>
            <td><code>-Dnetwork:BOOL=OFF</code></td>
            <td>disable network support</td>
          </tr>
        </table>

	<p>Transcoder (used to convert between internal UTF-16 and other encodings):</p>

        <table>
          <tr>
            <th>Option</th>
            <th>Description</th>
          </tr>
          <tr>
            <td><code>-Dtranscoder=gnuiconv</code></td>
            <td>use the GNU iconv library</td>
          </tr>
          <tr>
            <td><code>-Dtranscoder=iconv</code></td>
            <td>use the iconv library</td>
          </tr>
          <tr>
            <td><code>-Dtranscoder=icu</code></td>
            <td>use the ICU library</td>
          </tr>
          <tr>
            <td><code>-Dtranscoder=macosunicodeconverter</code></td>
            <td>use Mac OS X APIs (only on Mac OS X)</td>
          </tr>
          <tr>
            <td><code>-Dtranscoder=windows</code></td>
            <td>use Windows APIs (only on Windows and MinGW)</td>
          </tr>
        </table>

	<p>Message Loader (used to access diagnostics messages):</p>

        <table>
          <tr>
            <th>Option</th>
            <th>Description</th>
          </tr>
          <tr>
            <td><code>-Dmessage-loader=inmemory</code></td>
            <td>store the messages in memory</td>
          </tr>
          <tr>
            <td><code>-Dmessage-loader=icu</code></td>
            <td>store the messages using the ICU resource bundles</td>
          </tr>
          <tr>
            <td><code>-Dmessage-loader=iconv</code></td>
            <td>store the messages in the iconv message catalog</td>
          </tr>
        </table>

        <p>XMLCh type (UTF-16 character type):</p>

        <table>
            <tr>
                <th>Option</th>
                <th>Description</th>
            </tr>
            <tr>
                <td><code>-Dxmlch-type=char16_t</code></td>
                <td>use <code>char16_t</code> (requires a C++11 compiler)</td>
            </tr>
            <tr>
                <td><code>-Dxmlch-type=uint16_t</code></td>
                <td>use <code>uint16_t</code> from
                    <code>&lt;cstdint&gt;</code> or
                    <code>&lt;stdint.h&gt;</code>, or another unsigned
                    16-bit type such as <code>unsigned short</code> if
                    the standard types are unavailable</td>
            </tr>
            <tr>
                <td><code>-Dxmlch-type=wchar_t</code></td>
                <td>use <code>wchar_t</code> (Windows only)</td>
            </tr>
        </table>

        <p>MFC debug support is enabled by default (Windows only) and
           can be disabled with the
           <code>-Dmfc-debug:BOOL=OFF</code> option.</p>

        <p>Thread support is enabled by default and can be disabled
           with the <code>-Dthreads:BOOL=OFF</code> option.  If disabled,
           it will not be possible to select a mutex manager other than
           <code>nothreads</code>.  If enabled, one of the following
           mutex managers may be selected:</p>

        <table>
          <tr>
            <th>Option</th>
            <th>Description</th>
          </tr>
          <tr>
            <td><code>-Dmutex-manager=standard</code></td>
            <td>Use Standard C++ mutex (requires a C++11 compiler)</td>
          </tr>
          <tr>
            <td><code>-Dmutex-manager=posix</code></td>
            <td>Use POSIX threads (pthreads)  mutex (only on UNIX and Cygwin)</td>
          </tr>
          <tr>
            <td><code>-Dmutex-manager=windows</code></td>
            <td>Use Windows threads mutex (Windows and MinGW only)</td>
          </tr>
          <tr>
            <td><code>-Dmutex-manager=nothreads</code></td>
            <td>Use dummy implementation (default if threading is disabled)</td>
          </tr>
        </table>

        <p>Shared libraries are built by default. You can use the
           <code>-DBUILD_SHARED_LIBS:BOOL=OFF</code> option to build
           static libraries.</p>

         <p>If you need to specify compiler executables that should be
            used to build &XercesCName;, you can set the CC and CXX
            environment variables when invoking
            <code>cmake</code>. Similarly, if you need to specify
            additional compiler or linker options, you can set the
            CFLAGS, CXXFLAGS, and LDFLAGS environment variables.  For
            example:</p>

         <source>CC=gcc-5.3 CXX=g++-5.3 CFLAGS=-O3 CXXFLAGS=-O3 cmake ...</source>

         <note>
           If building on Windows, the specific Visual Studio version
           may be selected with some generators, and this may be run
           from a normal command prompt.  If using a generic generator
           such as <code>Ninja</code>, then <code>cmake</code> should
           be run from a Visual Studio command prompt, or in a
           suitably configured environment, so that the correct
           compiler will be detected.
         </note>

         <p>Once the configuration part is complete you can run the
            build tool of choice.  This may be done generically using
            <code>cmake --build . [--config=Debug|Release]</code>.
            Alternatively, a specific build tool, e.g. <code>make</code>,
            <code>gmake</code>, <code>ninja</code> or
            <code>msbuild</code> corresponding to the chosen generator
            may be used directly.  When invoked without a specific
            target, it will build the &XercesCName; library, all examples
            and all unit tests.</p>

         <p>If you would like to run the automated test suite, run
            <code>ctest [-V] [-C Debug|Release]</code>.  This will run
            all tests.  Additional <jump
            href="https://cmake.org/cmake/help/latest/manual/ctest.1.html">options</jump>
            are available, such as running a subset of the tests and
            running the tests in parallel.  If any discrepancies in the
            output are detected, the differences will be displayed if a
            <code>diff</code> program is available.</p>

         <p>Finally, install the library and examples.  This may be
            done generically using <code>cmake --build . --target
            install</code>.  Alternatively, a specific build tool may be
            used, e.g. <code>make install</code>.  To change the
            installation directory, use the
            <code>-DCMAKE_INSTALL_PREFIX=prefix</code> <code>cmake</code>
            option.</p>

         <p>Some platforms and configurations may require extra
            <code>cmake</code> options.  Run <code>cmake -LH</code> to
            list the additional options, along with a short description
            for each.  For each of the selection categories mentioned
            above, the help text will list the valid choices detected for
            your platform.  Run <code>cmake -LAH</code> for all the
            additional advanced settings.</p>

         <p>Several examples of configuring, building, testing and
            installing with CMake using different platforms, generators,
            and installation options are shown below:</p>

      <table>
        <tr>
          <th>Platform</th>
          <th>Generator</th>
          <th>Example</th>
        </tr>
        <tr>
          <td>Any</td>
          <td>Ninja</td>
          <td><code>mkdir build</code><br/>
          <code>cd build</code><br/>
          <code>cmake -G Ninja -DCMAKE_INSTALL_PREFIX=/opt/xerces-c -DCMAKE_BUILD_TYPE=Release -Dnetwork-accessor=curl /path/to/xerces-c/source</code><br/>
          <code>ninja</code><br/>
          <code>ctest -V -j 8</code><br/>
          <code>ninja install</code></td>
        </tr>
        <tr>
          <td>Unix</td>
          <td>Unix Makefiles</td>
          <td><code>mkdir build</code><br/>
          <code>cd build</code><br/>
          <code>cmake -G "Unix Makefiles" -DCMAKE_INSTALL_PREFIX=/opt/xerces-c -DCMAKE_BUILD_TYPE=Debug -Dmessage-loader=icu /path/to/xerces-c/source</code><br/>
          <code>make -j8</code><br/>
          <code>make test</code><br/>
          <code>make install</code></td>
        </tr>
        <tr>
          <td>Windows</td>
          <td>msbuild with VS2015 x64</td>
          <td><code>mkdir build</code><br/>
          <code>cd build</code><br/>
          <code>cmake -G "Visual Studio 14 2015 Win64" -DCMAKE_INSTALL_PREFIX=D:\libs &nbsp;&nbsp; \path\to\xerces-c\source</code><br/>
          <code>cmake --build . --config Debug</code><br/>
          <code>ctest -V -C Debug -j 4</code><br/>
          <code>cmake --build . --config Debug --target install</code></td>
        </tr>
        </table>
        <p/>

        <note>
          Note that different UNIX platforms use different system
          environment variables for finding shared libraries. On Linux
          and Solaris, the environment variable name is
          <code>LD_LIBRARY_PATH</code>, on AIX it is
          <code>LIBPATH</code>, on Mac OS X it is
          <code>DYLD_FALLBACK_LIBRARY_PATH</code>, and on HP-UX it is
          <code>SHLIB_PATH</code>.
        </note>

	<note>
          Note that Windows is different from the UNIX platforms in
          the way it finds shared libraries at run time.  While UNIX
          platforms may use the <code>LD_LIBRARY_PATH</code>
          environment variable, Windows uses the <code>PATH</code>
          environment variable if the library is not in the same
          directory as the executable.
        </note>
    </s3>

    <anchor name="UNIX"/>
    <s3 title="Building on UNIX/Linux/Mac OS X/Cygwin/MinGW platforms">

        <p>For building on UNIX and UNIX-like (GNU/Linux, Max OS X,
           Cygwin, MinGW-MSYS) platforms &XercesCName; uses the
           GNU automake-based build systems and requires that you
           have <jump href="http://www.gnu.org/software/make/make.html">GNU
           make</jump> installed. On some platforms GNU make is called gmake
           instead of make.</p>

        <p>As with all automake-based projects the build process is divided
           into two parts: configuration and building. The configuration
           part is performed using the <code>configure</code> script that
           can be found in the <code>&XercesC3SrcInstallDir;</code> directory.
           The build part is performed by invoking <code>make</code>.</p>

        <p>Besides the standard <code>configure</code> options which
           you can view by running <code>configure --help</code>,
           &XercesCName; provides a number of project-specific options
           that are worth mentioning. You can specify one option for
           each category outlined below. If you do not specify anything
           for a particular category then <code>configure</code> will
           select the most appropriate default. At the end of its
           execution <code>configure</code> prints the selected
           values for each category.</p>


	<p>Net Accessor (used to access network resources):</p>

        <table>
          <tr>
            <th>Option</th>
            <th>Description</th>
          </tr>
          <tr>
            <td><code>--enable-netaccessor-curl</code></td>
            <td>use the libcurl library</td>
          </tr>
          <tr>
            <td><code>--enable-netaccessor-socket</code></td>
            <td>use plain sockets</td>
          </tr>
	  <tr>
            <td><code>--enable-netaccessor-cfurl</code></td>
            <td>use the CFURL API (only on Mac OS X)</td>
          </tr>
	  <tr>
            <td><code>--enable-netaccessor-winsock</code></td>
            <td>use WinSock (only on Windows, Cygwin, MinGW)</td>
          </tr>
          <tr>
            <td><code>--disable-network</code></td>
            <td>disable network support</td>
          </tr>
        </table>

	<p>Transcoder (used to convert between internal UTF-16 and other encodings):</p>

        <table>
          <tr>
            <th>Option</th>
            <th>Description</th>
          </tr>
          <tr>
            <td><code>--enable-transcoder-gnuiconv</code></td>
            <td>use the GNU iconv library</td>
          </tr>
          <tr>
            <td><code>--enable-transcoder-iconv</code></td>
            <td>use the iconv library</td>
          </tr>
          <tr>
            <td><code>--enable-transcoder-icu</code></td>
            <td>use the ICU library</td>
          </tr>
          <tr>
            <td><code>--enable-transcoder-macosunicodeconverter</code></td>
            <td>use Mac OS X APIs (only on Mac OS X)</td>
          </tr>
          <tr>
            <td><code>--enable-transcoder-windows</code></td>
            <td>use Windows APIs (only on Windows, Cygwin, MinGW)</td>
          </tr>
        </table>

	<p>Message Loader (used to access diagnostics messages):</p>

        <table>
          <tr>
            <th>Option</th>
            <th>Description</th>
          </tr>
          <tr>
            <td><code>--enable-msgloader-inmemory</code></td>
            <td>store the messages in memory</td>
          </tr>
          <tr>
            <td><code>--enable-msgloader-icu</code></td>
            <td>store the messages using the ICU resource bundles</td>
          </tr>
          <tr>
            <td><code>--enable-msgloader-iconv</code></td>
            <td>store the messages in the iconv message catalog</td>
          </tr>
        </table>

        <p>XMLCh type (UTF-16 character type):</p>

        <table>
            <tr>
                <th>Option</th>
                <th>Description</th>
            </tr>
            <tr>
                <td><code>--enable-xmlch-char16_t</code></td>
                <td>use <code>char16_t</code> (requires a C++11 compiler)</td>
            </tr>
            <tr>
                <td><code>--enable-xmlch-uint16_t</code></td>
                <td>use <code>uint16_t</code> from
                    <code>&lt;cstdint&gt;</code> or
                    <code>&lt;stdint.h&gt;</code>, or another unsigned
                    16-bit type such as <code>unsigned short</code> if
                    the standard types are unavailable</td>
            </tr>
            <tr>
                <td><code>--enable-xmlch-wchar_t</code></td>
                <td>use <code>wchar_t</code> (Windows only)</td>
            </tr>
        </table>

        <p>Thread support is enabled by default and can be disabled with the
           <code>--disable-threads</code> option.  If disabled,
           it will not be possible to select a mutex manager other than
           <code>nothreads</code>.  If enabled, one of the following
           mutex managers may be selected:</p>

        <table>
          <tr>
            <th>Option</th>
            <th>Description</th>
          </tr>
          <tr>
            <td><code>--enable-mutexmgr-standard</code></td>
            <td>Use Standard C++ mutex (requires a C++11 compiler)</td>
          </tr>
          <tr>
            <td><code>--enable-mutexmgr-posix</code></td>
            <td>Use POSIX threads (pthreads)  mutex (only on UNIX and Cygwin)</td>
          </tr>
          <tr>
            <td><code>--enable-mutexmgr-windows</code></td>
            <td>Use Windows threads mutex (Windows and MinGW only)</td>
          </tr>
          <tr>
            <td><code>--enable-mutexmgr-nothreads</code></td>
            <td>Use dummy implementation (default if threading is disabled)</td>
          </tr>
        </table>

        <p>By default <code>configure</code> selects both shared and static
           libraries. You can use the <code>--disable-shared</code> and
           <code>--disable-static</code> options to avoid building the
           version you don't need.</p>

        <p>Finally, to make the build process cleaner the &XercesCName;
           build system hides actual compiler commands being executed
           by <code>make</code>. If you would like to see those then you
           can specify the <code>--disable-pretty-make</code> option.</p>

         <p>If you need to specify compiler executables that should be
            used to build &XercesCName;, you can set the CC and CXX
            variables when invoking <code>configure</code>. Similarly,
	    if you need to specify additional compiler or linker options,
            you can set the CFLAGS, CXXFLAGS, and LDFLAGS variables.
            For example:</p>

         <source>./configure --disable-static CC=gcc-4.3 CXX=g++-4.3 CFLAGS=-O3 CXXFLAGS=-O3</source>

         <p>Once the configuration part is complete you can run
            <code>make</code> (or <code>gmake</code>). Running
            <code>make</code> from the <code>&XercesC3SrcInstallDir;</code>
            directory builds &XercesCName; library and examples. The
            library is placed into the <code>src/.libs</code> directory. If
            you like to build only the library, you can run make from
            <code>&XercesC3SrcInstallDir;/src</code>.</p>

         <p>If you would like to build the tests and run the
            automated test suite, run <code>make check</code>
            from the <code>&XercesC3SrcInstallDir;</code>
            directory. The automated test suite required
            Perl and the <code>diff</code> command.</p>

         <p>Finally, to install the library and examples you can run
            <code>make install</code> (or <code>gmake install</code>).
            To change the installation directory, use the <code>--prefix</code>
            <code>configure</code> option.</p>

         <p>Some platforms and configurations require extra
            <code>configure</code> and <code>make</code> options
            which are shown in the following table.</p>

      <table>
        <tr>
          <th>Platform</th>
          <th>Compiler</th>
          <th>Options</th>
        </tr>
        <tr>
          <td>Solaris x86</td>
          <td>Sun CC</td>
          <td><code>./configure CXX=CC CC=cc</code></td>
        </tr>
        <tr>
          <td>Solaris x86-64</td>
          <td>Sun CC</td>
          <td><code>./configure CXX=CC CC=cc CFLAGS=-xarch=amd64 CXXFLAGS=-xarch=amd64</code><br/>
              (for newer Sun CC versions use -m64 instead of -xarch=amd64)</td>
        </tr>
        <tr>
          <td>Solaris SPARC</td>
          <td>Sun CC</td>
          <td><code>./configure CXX=CC CC=cc</code></td>
        </tr>
        <tr>
          <td>Solaris SPARCv9</td>
          <td>Sun CC</td>
          <td><code>./configure CXX=CC CC=cc CFLAGS=-xarch=v9 CXXFLAGS=-xarch=v9</code><br/>
              (for newer Sun CC versions use -m64 instead of -xarch=v9)</td>
        </tr>
        <tr>
          <td>AIX PowerPC</td>
          <td>IBM XL C++</td>
          <td><code>./configure CXX=xlC_r CC=xlc_r</code><br/>
              <code>gmake libxerces_c_la_LDFLAGS=-qmkshrobj</code></td>
        </tr>
        <tr>
          <td>AIX PowerPC-64</td>
          <td>IBM XL C++</td>
          <td><code>export OBJECT_MODE=64</code><br/>
              <code>./configure CXX=xlC_r CC=xlc_r CXXFLAGS=-q64 CFLAGS=-q64</code><br/>
              <code>gmake libxerces_c_la_LDFLAGS=-qmkshrobj</code></td>
        </tr>
        <tr>
          <td>HP-UX IA-64-32</td>
          <td>HP aCC</td>
          <td><code>./configure CXX=aCC CC=aCC CFLAGS=-mt CXXFLAGS=-mt LDFLAGS=-mt</code></td>
        </tr>
        <tr>
          <td>HP-UX IA-64</td>
          <td>HP aCC</td>
          <td><code>./configure CXX=aCC CC=aCC CFLAGS="-mt +DD64" CXXFLAGS="-mt +DD64" LDFLAGS="-mt +DD64"</code></td>
        </tr>
        <tr>
          <td>Mac OS X x86-64</td>
          <td>GCC</td>
          <td><code>./configure CFLAGS="-arch x86_64" CXXFLAGS="-arch x86_64" </code></td>
        </tr>
        <tr>
          <td>Mac OS X PowerPC-64</td>
          <td>GCC</td>
          <td><code>./configure CFLAGS="-arch ppc64" CXXFLAGS="-arch ppc64"</code></td>
        </tr>
        <tr>
          <td>Mac OS X x86/PowerPC</td>
          <td>GCC</td>
          <td><code>./configure --disable-dependency-tracking CFLAGS="-arch i386 -arch ppc" CXXFLAGS="-arch i386 -arch ppc"</code></td>
        </tr>
        <tr>
          <td>Mingw x86</td>
          <td>GCC</td>
          <td><code>./configure LDFLAGS=-no-undefined</code></td>
        </tr>
        <tr>
          <td>Cygwin x86</td>
          <td>GCC</td>
          <td><code>./configure LDFLAGS=-no-undefined</code></td>
        </tr>
        </table>
        <p/>

        <note>
         Note that different UNIX platforms use different system
         environment variable for finding shared libraries. On Linux
         and Solaris, the environment variable name is
         <code>LD_LIBRARY_PATH</code>, on AIX it is
         <code>LIBPATH</code>, on Mac OS X it is
         <code>DYLD_LIBRARY_PATH</code>, and on HP-UX
         it is <code>SHLIB_PATH</code>.
        </note>

	<note>
          Note that Cygwin and MinGW are different from the UNIX platforms
          in the way they find shared libraries at run time. While UNIX
          platforms may use the <code>LD_LIBRARY_PATH</code> environment
          variable, Cygwin and MinGW use the <code>PATH</code> environment
          variable.
        </note>
    </s3>

  </s2>
</s1>
